A Question Mark

Unable to locate just the right disc?

Subject to satisfactory calculations we can adapt a stock disc spring to meet your needs.

We will also manufacture a custom disc spring to your exact specifications.

Complete our disc spring enquiry form for the UK's most competitive quote.


Contact Belleville Springs

Contact us

Frequently Asked Questions About Disc Springs

 

What materials are available?

Disc Springs to DIN 2093 are manufactured from Ck75 (DIN 1.1248) or 51CrV4 (DIN 1.8159) carbon spring steels depending upon thickness. Stock stainless steel disc springs are manufactured from X12CrNiAl177 (DIN 1.4310) or X7CrNiAl177 (DIN 1.4568) depending upon thickness.

We can also manufacture disc springs from a wide range of temperature and corrosion resistant material to suit your application. Please see the materials section for further details.

 

Can a disc spring be re-used?

As long as the disc spring has no signs of damage and the overall height is still within tolerance, then the disc spring can be reused.

 

Do the inside and outside dimensions change under compression?

Yes, the dimensions of disc springs do change under compression but as long as the recommended guide clearance is applied, it will not cause any problems.



If the answer to your question is not found here please contact us with your question and we will answer it as soon as possible.



Institute of Spring TechnologyMember of UK Spring Manufacturers AssociationBelleville QualityBritish Valve and Actuator Association

Details